Relyant® HC Premium Hydraulic AW 32
ANTI-WEAR HYDRAULIC OILS | Industrial
Description
The five grades are premium-quality anti-wear hydraulic oils with outstanding stability, designed to meet the demanding requirements of most all the major manufacturers and users of hydraulic equipment. These oils are characterized by their clear appearance and clarity retention in operating systems, good rust protection, low deposit formation, rapid release of entrained air, oxidation resistance, low pour points, and good anti-foam properties. They are formulated from highly refined hydrocracked base stocks with an effective anti-wear agent that helps reduce wear in high-speed, high-pressure vane and gear pumps.
Application
Recommended for vane, gear, and piston-type pumps where operating pressures may exceed 3000 psi. These anti-wear hydraulic oils are very effective in reducing vane and gear pump wear and greatly extend the life of systems operating at high loads, speeds, and temperatures. In a clean dry system, typical value** for ASTM D-877, "Dielectric Breakdown Voltage of Insulating Liquids" will exceed 30+ Kilovolts. These hydraulic oils are suitable for use in DIN 51524 HLP, Denison HF-0 (HM), Eaton-Vickers I-286-S, M-2950-S and Cincinnati Lamb Landis P-68, P-69, and P-70, GM LS-2, ISO 6743/4, ISO 11158, ASTM D-6158 (HM), BOSCH Rexroth RDE-90235, AIST 127, 126 (USS), AFNOR NF E 48-603, SEB 181222. **Application ISO Grades 10, 15, 22, 32, 46, & 68 meet dielectric strength test results described in ASTM D-877 @ 30KV+ providing customer storage and containment are free of moisture under all conditions.
Description
The five grades are premium-quality anti-wear hydraulic oils with outstanding stability, designed to meet the demanding requirements of most all the major manufacturers and users of hydraulic equipment. These oils are characterized by their clear appearance and clarity retention in operating systems, good rust protection, low deposit formation, rapid release of entrained air, oxidation resistance, low pour points, and good anti-foam properties. They are formulated from highly refined hydrocracked base stocks with an effective anti-wear agent that helps reduce wear in high-speed, high-pressure vane and gear pumps.
Application
Recommended for vane, gear, and piston-type pumps where operating pressures may exceed 3000 psi. These anti-wear hydraulic oils are very effective in reducing vane and gear pump wear and greatly extend the life of systems operating at high loads, speeds, and temperatures. In a clean dry system, typical value** for ASTM D-877, "Dielectric Breakdown Voltage of Insulating Liquids" will exceed 30+ Kilovolts. These hydraulic oils are suitable for use in DIN 51524 HLP, Denison HF-0 (HM), Eaton-Vickers I-286-S, M-2950-S and Cincinnati Lamb Landis P-68, P-69, and P-70, GM LS-2, ISO 6743/4, ISO 11158, ASTM D-6158 (HM), BOSCH Rexroth RDE-90235, AIST 127, 126 (USS), AFNOR NF E 48-603, SEB 181222. **Application ISO Grades 10, 15, 22, 32, 46, & 68 meet dielectric strength test results described in ASTM D-877 @ 30KV+ providing customer storage and containment are free of moisture under all conditions.
Heavy Duty
Relyant Oils offer an extensive line of high quality lubricants for your heavy duty diesel trucks needs ranging from engine oils, gear oils and transmission fluids.
Industrial
Relyant Oils offer an extensive line of high quality lubricants for a variety of industrial equipment ranging Hydraulic pumps, gears, turbines, Natural gas engine, off-road equipment, tractors and more.