800-344-1495

Logo image for Relyant Performance Driven Oils.

Relyant Oils

Performance Driven Oils

  • Home
  • About
  • Services
  • Data Sheets
  • Contact

RELYANT® PREMIUM AW HYDRAULIC OIL ISO 10-100

Technical Data Sheet
Safety Data Sheet
Category: Industrial Anti-Wear Hydraulic Oils

PREMIUM ANTI-WEAR HYDRAULIC OIL
ISO GRADES 10, 15, 22, 32, 46, 68, 100

Download Technical Data Sheet PDF

Typical Properties

ISO Grades: 10, 15, 22, 32, 46, 68, 100

Viscosity, cSt at 40°C

10 | 10.98

15 | 15.5

22 | 22.0

32 | 30.2

46 | 44.2

68 | 66.2

100 | 93.8

Viscosity, cSt at 100°C

10 | 3.3

15 | 3.5

22 | 4.3

32 | 5.2

46 | 6.6

68 | 8.5

100 | 10.6

Viscosity Index

10 | 100

15 | 100

22 | 100

32 | 100

46 | 98

68 | 95

100 | 95

Flash Point, (COC) °F

10 | 370

15 | 380

22 | 395

32 | 405

46 | 425

68 | 445

100 | 460

Pour Point, °F

10 | -35

15 | -35

22 | -25

32 | -20

46 | -15

68 | -0

100 | —

Neut. No., ASTM D 974

10 | 0.55

15 | 0.55

22 | 0.55

32 | 0.55

46 | 0.55

68 | 0.55

100 | 0.55

Gravity, API @ 60°F

10 | 33.0

15 | 31.5

22 | 31.0

32 | 30.0

46 | 29.0

68 | 28.7

100 | 28.3

Oxidation Life, ASTM D 943 Hrs

10 | +6000

15 | +6000

22 | +6000

32 | +6000

46 | +6000

68 | +6000

100 | +5500

Rust Test, ASTM D 665A&B

10 | No Rust

15 | No Rust

22 | No Rust

32 | No Rust

46 | No Rust

68 | No Rust

100 | No Rust

Demulsibility, ASTM D-1401

10 | Pass

15 | Pass

22 | Pass

32 | Pass

46 | Pass

68 | Pass

100 | Pass

**Dielectric Strength, ASTM D877

10 | 30KV+

15 | 30KV+

22 | 30KV+

32 | 30KV+

46 | 30KV+

68 | 30KV+

100 | —

The values shown are typical of current production. Some are controlled in the manufacturing process, while others are not. All of them may vary within tolerable ranges.

These five grades are premium-quality anti-wear hydraulic oils with excellent stability, designed to meet the most stringent requirements of most all the major manufacturers and users of hydraulic equipment. These oils are characterized by providing rust protection, low deposit formation, rapid release of entrained air, oxidation resistance, low pour points, and good anti-foam properties. They contain an effective anti-wear agent that helps reduce wear in high-speed, high-pressure vane and gear pumps.

Applications

Recommended for vane, gear, and piston-type pumps where operating pressures may exceed 3000 psi. These anti-wear hydraulic oils are very effective in reducing vane and gear pump wear and greatly extend the life of systems operating at high loads, speeds, and temperatures. In a clean dry system, typical value** for ASTM D-877, “Dielectric Breakdown Voltage of Insulating Liquids” will exceed 30 Kilovolts. These hydraulic oils meet performance requirements of Denison HF-0, Eaton-Vickers I-286-S, M-2950-S and Cincinnati Lamb Landis P-68, P69, and P-70.

**Application ISO Grades 10, 15, 22, 32, 46, & 68 meet dielectric strength test results described in ASTM D-877 @ 30KV+ providing customer storage and containment are free of moisture under all conditions.

C:2101.F/100920

Consistency is the key to reliable performance American Petrolium InstituteSociety of Tribiologists and Lubrication Engineers

  • Home
  • About
  • Services
  • Data Sheets
  • Contact
(800) 344-1495
Relyant® Oils
5504 Jefferson Parkway | Pine Bluff, AR | 71602
Phone: (870) 247-2315 | Fax: (870) 247-4464 | Toll Free: (800) 344-1495

Sliced logo image for Relyant Oils.

Copyright 2022 Relyant Oils | All Rights Reserved | Web Design, Hosting and Marketing by Web International
Privacy Policy