RELYANT® EP INDUSTRIAL GEAR OIL ISO 68-680
Category: Industrial EP Gear Oils
INDUSTRIAL EP GEAR LUBRICANTS
ISO Grades: 68 – 680
Typical Properties
ISO Grade: 68, 100, 150, 220, 320, 460, 680
AGMA Number
68 | 2 EP
100 | 3 EP
150 | 4 EP
220 | 5 EP
320 | 6 EP
460 | 7 EP
680 | 8 EP
Viscosity, cSt at 40°C
68 | 67.6
100 | 101.8
150 | 147.8
220 | 220.9
320 | 320.9
460 | 475.3
680 | 678.3
Viscosity, cSt at 100°C
68 | 8.5
100 | 11.2
150 | 14.4
220 | 18.8
320 | 24.0
460 | 31.0
680 | 39.0
Viscosity, SUS at 100°F
68 | 353
100 | 460
150 | 788
220 | 1166
320 | 1707
460 | 2478
680 | 3691
Viscosity, SUS at 210°F
68 | 52
100 | 62
150 | 73
220 | 85
320 | 106
460 | 132
680 | 159
Viscosity Index
68 | 95
100 | 95
150 | 95
220 | 95
320 | 95
460 | 95
680 | 95
Pour Point, °F/°C
68 | -15/-26
100 | -15/-26
150 | -10/-23
220 | -5/-21
320 | -5/-21
460 | 0/-18
680 | +5/-15
Rust Test, ASTM D665
Passes Procedures A & B
Four Ball Weld, EP kgf
68 |275
100 | 275
150 | 275
220 | 275
320 | 275
460 | 275
680 | 275
Four Ball Load Wear Index
68 | 55
100 | 55
150 | 55
220 | 55
320 | 55
460 | 55
680 | 55
Four Ball Wear, mm
68 | 0.35
100 | 0.35
150 | 0.35
220 | 0.35
320 | 0.35
460 | 0.35
680 | 0.35
Foaming, Three Sequence
0/0
Gravity, API @ 60°F
68 | 29
100 | 28
150 | 27
220 | 26
320 | 26
460 | 25
680 | 24
The values shown are typical of current production. Some are controlled in the manufacturing process, while others are not. All of them may vary within tolerable ranges.
Premium quality non-lead general purpose extreme pressure industrial gear oils made from highly refined base stocks and compounded with additives to impart special film strength, anti-wear, oiliness, antioxidant, corrosion inhibitor, and foam suppressant characteristics. The additive system consists of sulfurphosphorous based EP technology for modification of gear rubbing surfaces to prevent welding and galling from inadequate film strength. The EP action is formed by chemical reaction between the additives and the metal surfaces under conditions of metal-to-metal contact resulting in boundary-film lubrication.
Applications
Recommended for their excellent oxidation and thermal stability to minimize viscosity increase and sludge formation at operating temperatures up to 200°F. They separate readily from water. Industrial EP Gear Oils are suitable for heavily loaded gear units and for gears subjected to shock loading. The product is suggested for lubrication of various gear types such as spur, bevel, helical, worm, and industrial hypoid cases on mobile type equipment. Included also are gear systems incorporated in cement mills, ball mills, crushers, hoists, winches, and marine equipment. They are also suitable for application in plain and rolling contact bearings. Industrial EP Gear Lubricants meet the following requirements: AGMA 250.04,ANSI/ AGMA 9005-D94; US STEEL 224; Cincinnati Machine (appropriate viscosity grades); Joy Technologies TOLEP (ISO 68); DIN 51517 (Sec.3); and David Brown SL 53.101.
C:5151.B/150421
INDUSTRIAL EP GEAR LUBRICANTS
ISO Grades: 68 – 680
Typical Properties
ISO Grade: 68, 100, 150, 220, 320, 460, 680
AGMA Number
68 | 2 EP
100 | 3 EP
150 | 4 EP
220 | 5 EP
320 | 6 EP
460 | 7 EP
680 | 8 EP
Viscosity, cSt at 40°C
68 | 67.6
100 | 101.8
150 | 147.8
220 | 220.9
320 | 320.9
460 | 475.3
680 | 678.3
Viscosity, cSt at 100°C
68 | 8.5
100 | 11.2
150 | 14.4
220 | 18.8
320 | 24.0
460 | 31.0
680 | 39.0
Viscosity, SUS at 100°F
68 | 353
100 | 460
150 | 788
220 | 1166
320 | 1707
460 | 2478
680 | 3691
Viscosity, SUS at 210°F
68 | 52
100 | 62
150 | 73
220 | 85
320 | 106
460 | 132
680 | 159
Viscosity Index
68 | 95
100 | 95
150 | 95
220 | 95
320 | 95
460 | 95
680 | 95
Pour Point, °F/°C
68 | -15/-26
100 | -15/-26
150 | -10/-23
220 | -5/-21
320 | -5/-21
460 | 0/-18
680 | +5/-15
Rust Test, ASTM D665
Passes Procedures A & B
Four Ball Weld, EP kgf
68 |275
100 | 275
150 | 275
220 | 275
320 | 275
460 | 275
680 | 275
Four Ball Load Wear Index
68 | 55
100 | 55
150 | 55
220 | 55
320 | 55
460 | 55
680 | 55
Four Ball Wear, mm
68 | 0.35
100 | 0.35
150 | 0.35
220 | 0.35
320 | 0.35
460 | 0.35
680 | 0.35
Foaming, Three Sequence
0/0
Gravity, API @ 60°F
68 | 29
100 | 28
150 | 27
220 | 26
320 | 26
460 | 25
680 | 24
The values shown are typical of current production. Some are controlled in the manufacturing process, while others are not. All of them may vary within tolerable ranges.
Premium quality non-lead general purpose extreme pressure industrial gear oils made from highly refined base stocks and compounded with additives to impart special film strength, anti-wear, oiliness, antioxidant, corrosion inhibitor, and foam suppressant characteristics. The additive system consists of sulfurphosphorous based EP technology for modification of gear rubbing surfaces to prevent welding and galling from inadequate film strength. The EP action is formed by chemical reaction between the additives and the metal surfaces under conditions of metal-to-metal contact resulting in boundary-film lubrication.
Applications
Recommended for their excellent oxidation and thermal stability to minimize viscosity increase and sludge formation at operating temperatures up to 200°F. They separate readily from water. Industrial EP Gear Oils are suitable for heavily loaded gear units and for gears subjected to shock loading. The product is suggested for lubrication of various gear types such as spur, bevel, helical, worm, and industrial hypoid cases on mobile type equipment. Included also are gear systems incorporated in cement mills, ball mills, crushers, hoists, winches, and marine equipment. They are also suitable for application in plain and rolling contact bearings. Industrial EP Gear Lubricants meet the following requirements: AGMA 250.04,ANSI/ AGMA 9005-D94; US STEEL 224; Cincinnati Machine (appropriate viscosity grades); Joy Technologies TOLEP (ISO 68); DIN 51517 (Sec.3); and David Brown SL 53.101.
C:5151.B/150421