RELYANT® HC AW HYDRAULIC ISO 22-100
Category: Industrial Anti-Wear Hydraulic Oils
PREMIUM “HC” ANTI-WEAR HYDRAULIC OILS
ISO GRADES 22, 32, 46, 68, 100
Typical Properties
ISO Grade: 22, 32, 46, 68, 100
Color, ASTM D-1500
22 | <0.5
32 | <0.5
46 | <0.5
68 | <0.5
100 | <0.5
Appearance
22 | Water Clear
32 | Water Clear
46 | Water Clear
68 | Water Clear
100 | Water Clear
Viscosity, cSt at 40°C
22 | 21.5
32 | 31.7
46 | 46.5
68 | 67.2
100 | 98.8
Viscosity, cSt at 100°C
22 | 4.2
32 | 5.3
46 | 6.8
68 | 8.6
100 | 10.9
Viscosity Index
22 | 100
32 | 100
46 | 99
68 | 98
100 | 95
Flash Point, (COC) °F
22 | 395
32 | 400
46 | 415
68 | 425
100 | 450
Pour Point, °F
22 | -30
32 | -25
46 | -25
68 | -20
100 | -5
Neut. No., ASTM D 974
22 | 0.55
32 | 0.55
46 | 0.55
68 | 0.55
100 | 0.55
Gravity, API @ 60°F
22 | 34.4
32 | 33.1
46 | 32.4
68 | 31.6
100 | 31.0
Rust Test, ASTM D 665A/B
22 | No Rust
32 | No Rust
46 | No Rust
68 | No Rust
100 | No Rust
Emulsion Test, ASTM D-1401 (40-40-0)
22 | 10 Min
32 | 10 Min
46 | 10 Min
68 | 10 Min
100 | 10 Min
Dielectric Strength, ASTM D-877
22 | 35KV
32 | 35KV
46 | 35KV
68 | 35KV
100 | 35KV
Hydraulic Stability, ASTM D-2619
Cu mass loss, mg/cm2
22 | 0.13
32 | 0.13
46 | 0.13
68 | 0.13
100 | 0.13
Oxidation Life, ASTM D 943 Hrs
22 | +7000
32 | +7000
46 | +7000
68 | +6500
100 | +6000
The values shown are typical of current production. Some are controlled in the manufacturing process, while others are not. All of them may vary within tolerable ranges.
The five grades are premium-quality anti-wear hydraulic oils with outstanding stability, designed to meet the demanding requirements of most all the major manufacturers and users of hydraulic equipment. These oils are characterized by their clear appearance and clarity retention in operating systems, good rust protection, low deposit formation, rapid release of entrained air, oxidation resistance, low pour points, and good anti-foam properties. They are formulated from highly refined hydrocracked base stocks with an effective anti-wear agent that helps reduce wear in high-speed, high-pressure vane and gear pumps.
Applications
Recommended for critical application of vane and gear pumps operated at elevated pressure levels, i.e. in excess of 6,900 kPa or 1000 psi. For systems incorporating axial piston pumps with pressures in excess of 3500 psi, these oils can be used where the manufacturer specifies anti-wear hydraulic oils. These oils are very effective in reducing pump wear, satisfying lubrication requirements of auxiliary system components, and greatly extending the life of systems operating at high loads, speeds, and temperatures. ISO Grades 32, 46, and 68 comply with requirements of Vickers I-286-S and M-2950-S; Cincinnati Milacron specifications P-68, P69, and P-70. These grades meet Denison HF-0 and HF-2 requirements. Dielectric strength is warranted at the origin and can be maintained providing low moisture contents are sustained and agitation under humid conditions are minimized.
C:2112A/020299
PREMIUM “HC” ANTI-WEAR HYDRAULIC OILS
ISO GRADES 22, 32, 46, 68, 100
Typical Properties
ISO Grade: 22, 32, 46, 68, 100
Color, ASTM D-1500
22 | <0.5
32 | <0.5
46 | <0.5
68 | <0.5
100 | <0.5
Appearance
22 | Water Clear
32 | Water Clear
46 | Water Clear
68 | Water Clear
100 | Water Clear
Viscosity, cSt at 40°C
22 | 21.5
32 | 31.7
46 | 46.5
68 | 67.2
100 | 98.8
Viscosity, cSt at 100°C
22 | 4.2
32 | 5.3
46 | 6.8
68 | 8.6
100 | 10.9
Viscosity Index
22 | 100
32 | 100
46 | 99
68 | 98
100 | 95
Flash Point, (COC) °F
22 | 395
32 | 400
46 | 415
68 | 425
100 | 450
Pour Point, °F
22 | -30
32 | -25
46 | -25
68 | -20
100 | -5
Neut. No., ASTM D 974
22 | 0.55
32 | 0.55
46 | 0.55
68 | 0.55
100 | 0.55
Gravity, API @ 60°F
22 | 34.4
32 | 33.1
46 | 32.4
68 | 31.6
100 | 31.0
Rust Test, ASTM D 665A/B
22 | No Rust
32 | No Rust
46 | No Rust
68 | No Rust
100 | No Rust
Emulsion Test, ASTM D-1401 (40-40-0)
22 | 10 Min
32 | 10 Min
46 | 10 Min
68 | 10 Min
100 | 10 Min
Dielectric Strength, ASTM D-877
22 | 35KV
32 | 35KV
46 | 35KV
68 | 35KV
100 | 35KV
Hydraulic Stability, ASTM D-2619
Cu mass loss, mg/cm2
22 | 0.13
32 | 0.13
46 | 0.13
68 | 0.13
100 | 0.13
Oxidation Life, ASTM D 943 Hrs
22 | +7000
32 | +7000
46 | +7000
68 | +6500
100 | +6000
The values shown are typical of current production. Some are controlled in the manufacturing process, while others are not. All of them may vary within tolerable ranges.
The five grades are premium-quality anti-wear hydraulic oils with outstanding stability, designed to meet the demanding requirements of most all the major manufacturers and users of hydraulic equipment. These oils are characterized by their clear appearance and clarity retention in operating systems, good rust protection, low deposit formation, rapid release of entrained air, oxidation resistance, low pour points, and good anti-foam properties. They are formulated from highly refined hydrocracked base stocks with an effective anti-wear agent that helps reduce wear in high-speed, high-pressure vane and gear pumps.
Applications
Recommended for critical application of vane and gear pumps operated at elevated pressure levels, i.e. in excess of 6,900 kPa or 1000 psi. For systems incorporating axial piston pumps with pressures in excess of 3500 psi, these oils can be used where the manufacturer specifies anti-wear hydraulic oils. These oils are very effective in reducing pump wear, satisfying lubrication requirements of auxiliary system components, and greatly extending the life of systems operating at high loads, speeds, and temperatures. ISO Grades 32, 46, and 68 comply with requirements of Vickers I-286-S and M-2950-S; Cincinnati Milacron specifications P-68, P69, and P-70. These grades meet Denison HF-0 and HF-2 requirements. Dielectric strength is warranted at the origin and can be maintained providing low moisture contents are sustained and agitation under humid conditions are minimized.
C:2112A/020299