RELYANT® AW WIDE-TEMP ISO 15-68
Category: Industrial Anti-Wear Hydraulic Oils
PREMIUM WIDE-TEMP/MV HYDRAULIC OILS
ISO GRADES 15, 22, 32, 46, 68
Typical Properties
ISO Grade: 15, 22, 32, 46, 68
Appearance
15 | Pale/Clear
22 | Pale/Clear
32 | Pale/Clear
46 | Pale/Clear
68 | Pale/Clear
Gravity, API @ 60°F
15 | 31.0
22 | 31.0
32 | 30.8
46 | 30.5
68 | 30.0
Viscosity, cSt at 40°C
15 | 17.3
22 | 23.9
32 | 34.5
46 | 46.7
68 | 68.5
Viscosity, cSt at 100°C
15 | 4.2
22 | 5.2
32 | 6.7
46 | 8.30
68 | 11.00
Viscosity Index
15 | 155
22 | 155
32 | 155
46 | 154
68 | 152
Flash Point, (COC) °F
15 | 310
22 | 350
32 | 370
46 | 400
68 | 425
Pour Point, °F (°C)
15 | -40 (-40)
22 | -40 (-40)
32 | -40 (-40)
46 | -35 (-37)
68 | -30 (-34)
Dielectric Strength, ASTM D-877
15 | 32Kv
22 | 32Kv
32 | 32Kv
46 | 32Kv
68 | 32Kv
Rust Test, ASTM D 665A
15 | No Rust
22 | No Rust
32 | No Rust
46 | No Rust
68 | No Rust
The values shown are typical of current production. Some are controlled in the manufacturing process, while others are not. All of them may vary within tolerable ranges.
Premium Wide-Temp/Multi-Vis Hydraulic Oils are formulated with highly refined distillate stocks, anti-wear agents, rust and oxidation inhibitors. These oils are characterized by multigrade viscosity properties that allow them to impart improved low temperature flow capability while providing increased service life for hydraulic pumps operated at elevated temperatures. They contain an effective anti-wear agent that helps reduce wear in high-speed, high-pressure vane and gear pumps.
Applications
Recommended for mobile, construction, agricultural, industrial equipment, and those hydraulic systems and applications that are subject to wide variations in ambient and system operating temperatures. In a clean dry system, typical value for ASTM D-877, “Dielectric Breakdown Voltage of Insulating Liquids” will exceed 32 Kv. This product is suitable for use in the following applications: AIST 127, 126, ASTM D-6158(HV), Chinese National Hydraulic Specifications GB111118.1-2001 (L-HV), DIN 51524 Part 2 and 3 (HVLP), SEB181222, ISO 11158 Hydraulic Fluids (HV), MAG Cincinnati Machine Anti-wear Hydraulic Specifications, General Motors Hydraulic Lubricant Standards (anti-wear hydraulic oil), Parker Denison Hydraulic Requirements- TP30560 (HF-0, HF-2), JCMAS HK (JCHASP 041:2004) Hydraulic Fluid for Construction Machinery (normal and low temperature use), and SAE MS1004 Type H Hydraulic Oil Specifications (HM anti-wear).
**Application ISO Grades 15, 22, 32, 46, & 68 meet dielectric strength test results described in ASTM D-877 @ 32Kv providing customer storage and containment are free of moisture under all conditions.
C:2108.1/150421
PREMIUM WIDE-TEMP/MV HYDRAULIC OILS
ISO GRADES 15, 22, 32, 46, 68
Typical Properties
ISO Grade: 15, 22, 32, 46, 68
Appearance
15 | Pale/Clear
22 | Pale/Clear
32 | Pale/Clear
46 | Pale/Clear
68 | Pale/Clear
Gravity, API @ 60°F
15 | 31.0
22 | 31.0
32 | 30.8
46 | 30.5
68 | 30.0
Viscosity, cSt at 40°C
15 | 17.3
22 | 23.9
32 | 34.5
46 | 46.7
68 | 68.5
Viscosity, cSt at 100°C
15 | 4.2
22 | 5.2
32 | 6.7
46 | 8.30
68 | 11.00
Viscosity Index
15 | 155
22 | 155
32 | 155
46 | 154
68 | 152
Flash Point, (COC) °F
15 | 310
22 | 350
32 | 370
46 | 400
68 | 425
Pour Point, °F (°C)
15 | -40 (-40)
22 | -40 (-40)
32 | -40 (-40)
46 | -35 (-37)
68 | -30 (-34)
Dielectric Strength, ASTM D-877
15 | 32Kv
22 | 32Kv
32 | 32Kv
46 | 32Kv
68 | 32Kv
Rust Test, ASTM D 665A
15 | No Rust
22 | No Rust
32 | No Rust
46 | No Rust
68 | No Rust
The values shown are typical of current production. Some are controlled in the manufacturing process, while others are not. All of them may vary within tolerable ranges.
Premium Wide-Temp/Multi-Vis Hydraulic Oils are formulated with highly refined distillate stocks, anti-wear agents, rust and oxidation inhibitors. These oils are characterized by multigrade viscosity properties that allow them to impart improved low temperature flow capability while providing increased service life for hydraulic pumps operated at elevated temperatures. They contain an effective anti-wear agent that helps reduce wear in high-speed, high-pressure vane and gear pumps.
Applications
Recommended for mobile, construction, agricultural, industrial equipment, and those hydraulic systems and applications that are subject to wide variations in ambient and system operating temperatures. In a clean dry system, typical value for ASTM D-877, “Dielectric Breakdown Voltage of Insulating Liquids” will exceed 32 Kv. This product is suitable for use in the following applications: AIST 127, 126, ASTM D-6158(HV), Chinese National Hydraulic Specifications GB111118.1-2001 (L-HV), DIN 51524 Part 2 and 3 (HVLP), SEB181222, ISO 11158 Hydraulic Fluids (HV), MAG Cincinnati Machine Anti-wear Hydraulic Specifications, General Motors Hydraulic Lubricant Standards (anti-wear hydraulic oil), Parker Denison Hydraulic Requirements- TP30560 (HF-0, HF-2), JCMAS HK (JCHASP 041:2004) Hydraulic Fluid for Construction Machinery (normal and low temperature use), and SAE MS1004 Type H Hydraulic Oil Specifications (HM anti-wear).
**Application ISO Grades 15, 22, 32, 46, & 68 meet dielectric strength test results described in ASTM D-877 @ 32Kv providing customer storage and containment are free of moisture under all conditions.
C:2108.1/150421
